€652.30 (Excl. VAT@23%)
Zilmet pressure tank's ULTRA PRO is suitable for any modern installation. Can be applied to any type of irrigation pump, centrifugal pump and booster sets.
Out of stock
Email to a friendDescription
Zilmet pressure tank’s ULTRA PRO is suitable for any modern installation. Can be applied to any type of irrigation pump, centrifugal pump and booster sets.
ULTRA-PRO: pressure vessels with a food-grade replaceable membrane. This line is ideal for every modern installation and can be applied to any type of pump. The real volume of the pressure vessel is much greater than normal that of normal tanks of the same dimension with smaller dimensions. A compressor is not necessary since an air cushion, separated from the water by the butyl membrane, maintains a constant pressure in the tank. These tanks can also be provided with stainless steel flanges. Available capacities are from 8 to 3000 liters ( 1.75 to 660 UK gallons). They are certified by the PED 2014/68/EU, WRAS, ACS. This line has specific models made for the Italian, European Community and Extra-European Community markets.
Features
ULTRA-PRO is suitable for any modern installation and can be applied to any type of irrigation pump, centrifugal pump and booster sets.
The food grade membrane is replaceable. The membrane pressure tank’s real volume is superior than that of a normal tank, therefore, it has a smaller footprint at equal water yield, minimum pump starts and is energy saving. The wide range available, the vertical and horizontal version, the galvanised and stainless steel connection flange makes Zilmet pressure tanks suitable for any application. The tank is factory tested and certified according to EU directive 97/23/EC. Maximum duration of the membrane is assured as the membrane itself cannot bend or rub against the plate as it is fixed above to the connection and below to the flange.
The pressure tank’s lifetime is practically unlimited as the membrane can be replaced.
Advantages
ULTRA-PRO pressure tanks are the best choice for irrigation pumps, centrifugal pumps, submersible pumps and for booster sets. The actual capacity of a bladder tank is bigger than the capacity of common storage tanks: the same performance can be obtained with a smaller volume, still granting minimum pump’s starts and thus saving energy.
The wide range of different capacities, the availability of vertical and horizontal models, together with the possible choice between galvanized steel and stainless steel flanges ensure that the ULTRA-PRO pressure tanks meet any end-user’s requirements. Our pressure tanks undergo a 100% factory testing procedure and are certified according to the PED 97/23/EC. The bladder, which is suitable for alimentary purpose, is fixed by both its ends thus avoiding any possible rubs against the inner tank’s surface. ULTRA-PRO pressure tanks may ensure unlimited service as their bladder is easily replaceable.
Technical features
– MIG-welded carbon steel body with no interior rough spots or sharp edges.
– Replaceable bladder suitable for use with potable water.
– External painting with long-lasting epoxy powder.
– Mild steel or stainless steel flanges for use with aggressive water.
– Capacity range from 24 to 3000 litres (from 6.3 to 792.60 US gallons).
– Vertical and horizontal models, with support for pump.
– Specific models for the Italian market.
– Special range with max. pressure 16 bar (232 psi)
Working
When the pump starts, water enters the membrane tank as system pressure passes the pressure precharge using the whole capacity of the tank. Only usable water is stored. When the pressure in the chamber reaches the maximum system pressure, the pump stops working. The tank is filled to its maximum capacity. When water will be needed again, pressure in the air side will push water into the system. Since the Zilmet ULTRA-PRO tank does not water log and delivers all possible water, minimum pump starts are assured with saving on energy consumption and increasing the pump life.
Additional information
Weight | 25 kg |
---|---|
Capacity Ltr | 200ltr |
Inlet | 11/2" |
Outlet | 11/2" |
Flow Rate | N/A |
Max Operating Temperature | 99C |
Max Pumping Height | N/A |
Weight (KG) | 25 |
Delivery is calculated at the checkout when the destination has been entered. We currently ship to Ireland, for other destinations please send us an email to discuss delivery.
Returns: How to return an item:
Put your unused item for return back in its original packaging. Send an email to info@waterpartsdirect.com and clearly state whether you are returning or exchanging your purchase and the reason why. Send the item back to the address below. We will be in touch if there are any issues or when your return has been processed.
Water Parts Direct, Rathnure Lower, Enniscorthy, Co. Wexford, Y21DX88
Mobile: +353 872592580
Email: info@waterpartsdirect.com
Returns Policy
At WaterPartsDirect we pride ourselves with the high-quality of the products we supply our customers and we always go out of our way to make sure that we provide you with only the best, regardless of your business or industry. We do of course understand that not every product is made equal and that sometimes there are cases where the product itself is not fit for purpose or simply do not suit for the reason that it was bought for. It is for this reason we are happy to accept items returned to us with 28 days of purchase and in this case we offer you an exchange or a full refund to your credit or debit card once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of WaterPartsDirect and may be refunded as a credit against a future purchase. All items must be returned to WaterPartsDirect in the same condition in which they were shipped and in a saleable condition. WaterPartsDirect reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.